# text: " For Help with \n any item hold \n down the option\n key as you \n select the item."
# item 10: PICTURE (0x40) enabled
# bounds: x1=205 y1=2 x2=265 y2=50
# PICT resource ID: 128
# item 11: PICTURE (0x40) enabled
# bounds: x1=187 y1=202 x2=340 y2=237
# PICT resource ID: 100
# item 12: TEXT (0x88) disabled
# bounds: x1=97 y1=206 x2=185 y2=243
# text: "About \n INIT-Scope"
DITL_-4060.txt
# 1 entries
# item 0: PICTURE (0x40) enabled
# bounds: x1=12 y1=7 x2=370 y2=282
# PICT resource ID: 129
DITL_-4051.txt
# 2 entries
# item 0: TEXT (0x08) enabled
# bounds: x1=17 y1=5 x2=263 y2=71
# text: "If you select the \'Skip with Shift Key\' option, then you can skip any INIT by just depressing the Shift key (only) as it is about to load. "
# item 1: TEXT (0x08) enabled
# bounds: x1=17 y1=78 x2=282 y2=166
# text: "INIT-Scope will emit a short beep and will delay about 2 seconds so that you can release the Shift key before the process continues."
DITL_-4050.txt
# 1 entries
# item 0: TEXT (0x08) enabled
# bounds: x1=17 y1=4 x2=254 y2=121
# text: "If you check the \'Intercept with Option Key\' box, you can drop into the debuger just as an INIT is about to execute. All you need do is depress the Option key (only) just before the INIT is loaded."
DITL_-4049.txt
# 1 entries
# item 0: TEXT (0x08) enabled
# bounds: x1=4 y1=18 x2=269 y2=172
# text: "If you do not want INIT-Scope to execute the next time you turn on your Macintosh, you may turn it off from the control panel. \n\nINIT-Scope will also not execute if the Shift Key is held down."
DITL_-4048.txt
# 2 entries
# item 0: TEXT (0x08) enabled
# bounds: x1=17 y1=18 x2=288 y2=112
# text: "The \'Show Resource Info\' option displays every type of resource that each INIT accesses. Some of the resource types shown may be accessed only indirectly by the INIT."
# item 1: TEXT (0x08) enabled
# bounds: x1=17 y1=119 x2=290 y2=202
# text: "This information is also available from the trap history portion of the report (just not as organized). So you won\'t generally use this option."